Main Features
- Air Technology The AIRFLOW 3000 has an easy one-touch looper threading that uses a blast of air for threading. With threading ports that are connected to the end of each looper by tubes, at the press of a button, the air sends the thread through the looper. So, it's like a breath of fresh air to change thread colors.
- Great Stitch Quality Achieve outstanding finishing touches with flatlock, overlock, and rolled hem stitches on specialty fabrics such as fine knits and stretchy materials.
- Differential Feed The Differential Feed Ratio (0.7mm to 2.0mm) on the AIRFLOW 3000 provides outstanding stitch quality and acts as the tool for custom lettuce edge finishes on specialty materials.
- Great for Challenging Materials Excellent for adding professional finishing touches on fine knits and stretchy materials, which can be challenging fabrics on traditional sewing machines.
- Brightly Lit Work Area The AIRFLOW 3000 has plenty of high-quality LED lighting that is easy on the eyes when sewing on dark fabrics.
- Quick Change Levers The AIRFLOW 3000 has pair of quick-change levers for the rolled hemstitch feature, and a switch that will activate and deactivate the cutting knife before the edge is wrapped with thread. (serged).
- Safety Sensor and Error LED When following conditions occur, an open fabric cover or front cover, the presser foot is raised, the AIRFLOW 3000 serger will not work and an error LED light will come on.
- No Lint Build-up As the threads are constantly moved through tubes by the jet-air technology, fluff and lint are kept to a minimum so as not to build up and clog the lines
- Noise Level Moderate Add decorative touches and professional finishes to any DIY project, anywhere, anytime.
- Specialty Feet Included: The AIRFLOW 3000 comes with a Gathering Foot, a Blind Stitch Foot, a Piping Foot, and a Trim Trap so you can start your next DIY project.
- Blind stitch foot
- Gathering foot
- Piping foot
- Needle set (130/705H) #80: 2 pcs., #90: 2 pcs
- Thread spool cap : 4 pcs
- Thread net : 4 pcs
- Threading wire
- Hexagonal driver
- Tweezers
- Cleaning brush
- Accessory box
- Trim trap
- Soft cover
- Foot controller
- Operation manual
Specification Details
Take a look below for helpful videos on how to use this overlocker!
Introduction
Threading
Stitch Adjustment
Sewing
Sewing Techniques
Maintenance
Accessories shown in detail
Receive a FREE machine carry bag and save £50 until 31st December 2024!
Worried about threading? Then this is the overlocker for you!
Make working on challenging fabrics a breeze with the Brother Airflow 3000 overlocker. Brother's fastest, easiest, electronic air threader. Built for speed it boasts an easy-to-use air threading system, advanced needle threader, quick release levers and stitching speeds of up to 1,300spm! This brilliant overlocker can achieve outstanding finishing touches with flatlock, overlock and rolled hem stitches on most speciality fabrics! Welcome a breath of fresh air in and worry not for threading, the threading ports are connected to the end of each looper by tubes, and at the touch of a button, a blast of air sends the threads through the loopers, so it's a cinch to change thread colours.
- Look sharp, the Airflow 3000 will blow anything you’ve made before out of the water. Achieve the finest of finishes on knits, stretchy materials, sheer fabrics and even Lycra.
- Electronic air threader - simply insert your thread into the threading holes and ‘whoosh’ our air system guides it through the loopers for you.
- Stitch choice – choose between 4 thread overlock, 3 thread overlock narrow, 3 thread overlock wide, flat lock 2 thread, flat lock 3 thread, pin tuck, blind hem, rolled hem, narrow hem and lettuce edge.
- Stitch quality – stitch at speeds of up to 1,300spm! Use the dials to adjust stitch length and width as needed.
- Differential feed – with a differential feed ratio of 0.7 to 2mm you’ll get an outstanding stitch finish, no matter what fabric you’re working on.
- Instant rolled hem – quick-change levers will give you an instant rolled hem. Perfect for light and sheer fabrics. Choose between straight and wavy rolled hem.
- Avoid annoying clogs – smooth air technology keeps everything moving, so there’s no lint or fluff build up.
- Safety first - cover open? Raised presser foot? The machine won’t start! As an extra precaution, the safety sensor deactivates the cutting knife immediately, keeping you safe and protecting the loopers.
- Extra value – the Airflow 3000 comes with trim trap, blind stitch foot, gathering foot and piping foot.
Take a look below at an array of different brilliant videos showcasing the NEW Brother Airflow 3000 in full force!
Brother Airflow 3000 Overlocker
- Brand: Brother
- Product Code: Brother Airflow 3000 Overlocker
- Availability: 4
- £899.00
-
£849.00
Related Products
Pearl Presser Foot XB4436001
Pearl presser foot for Brother overlockers SA217 For a truly unique finish, why not try the Bro..
£38.99
Wide Table For Airflow 3000 SERGERWT3
Airflow overlocker wide table SERGERWT3 No project will be too big for you to handle with the A..
£99.99
Tags: Brother Airflow 3000
